News Center

  • Tel: 086-0769-22808982
  • Contacts:Please Complete English Contact
  • Fax:
  • Address: Nanya Administration Area,Daojiao town,Dongguan,Guangdong,China

Punching die with material how to do?
From: Dongguan market Kau too macro processing hardware store Post date: 2017-04-06


Punching net die with material will cause waste rebound, its related factors:
The sharp edge of the knife edge, the larger the fillet, the more likely to cause waste rebound.
Two, the mold into the modulus, the machine tool for each station into the modulus is certain, the mold into a small modulus, easy to cause waste rebound.
Three, the gap between the mold is reasonable, if the mold gap is not appropriate, easy to cause waste rebound.
Four, the surface of the processed plate whether there is more oil.
Five, spring fatigue damage.
So, what is a good solution? ZTE recommends you:
First, the use of a special anti material concave die.
Two, the mold often sharpening to maintain sharp, and demagnetization treatment.
Three, increase die gap.
Four, the use of oblique edge die instead of flat edge die.
Five, mold installation.
Six, increase the modulus of the mold.
Seven. Check the fatigue strength of the mould spring or discharge cover.
Macro management: Die Tachi knife mold metal materials, leather cloth punching machine, punching special punching. Since the creation of Dongguan macro too comfortable, has been committed to metal mold technology innovation, development, innovation, to first-class quality and excellent service, creating a new era of Dongguan City Hardware die cutter.

  • Tel:

    13829156296

    18676993103

  • E-mail:

    dghongtai@dghongtai.cn

  • Address:

    Nanya Administration Area,Daojiao town,Dongguan,Guangdong,China

粤公网安备 44190002001619号